Controlled-products-systems-group 26SASM Manuale Utente Scaricare il pdf (Pagina 19)

Secura Key • 15

INSTALLATION INSTRUCTIONS

SURFACE HOUSING TO SINGLE GANG ELECTRICAL BOX

(See Figure 4)

1. For exterior walls, apply 1/4 inch bead of silicone sealant

around rear perimeter surface of mounting bracket gasket.

Be sure there is sufficient sealant to make a good seal

between gasket and wall.

2. Use two 6-32 x 1 pan head screws provided to secure

mounting plate to box.

3. Connect power and control lines to wire leads provided as

per the wiring instructions.

4. Plug connector into reader board.

5. Place ENTRACOMP

26SA housing against mounting plate,

top edge first, centering housing on retaining tabs. Secure

housing to plate at bottom using one 6-32 x 3/8 security

screw provided or equivalent.

6. Lock cam lock.

SURFACE HOUSING WITHOUT ELECTRICAL BOX

(See Figure 5)

1. For exterior walls, apply 1/4 inch bead of silicone sealant

around rear perimeter surface of mounting bracket gasket.

Be sure there is sufficient sealant to make a good seal

between gasket and wall.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Nessun commento

Controlled-products-systems-group 26SASM Manuale Utente Pagina 19